Тракторы и сельхозмашины

Stopalov S.G. Tractors’ power and reliability (pр. 3-6)

Agricultural machinery market

New mini skid steer loaders’ tests are completed (р. 16)
Machinery & Industrial Group N.V. is going to localize the production of Vogel & Noot attached implements in Russia (р. 48)

New machines and equipment

Dzotsenidze T.D., Ulyanov O.V., Kozlovskaya M.A., Ilyin V.M. Test results of ВТ-155Д caterpillar tractor with a new superstructure (pр. 7-9)
Gorshkov Yu.G., Chetyrkin Yu.B., Bogdanov A.V., Leschenko Ye.A. An automatic device for air pressure regulation in the tires of high power tractors with locked axles drive (pр. 9-12)
Voynash S.A., Voynash A.S. A transport and technological machine for the organic fertilizers application (pр. 12-14)

Theory, designing, testing

Mamiti G.I., Pliyev S.Kh. Stability of wheel tractor with rocking front axle when driving on a level road (pр. 14-16)
Dyachkov Ye.A., Fedyanov Ye.A., Deynichenko Ye.M. Regulation of torque converter as a way of matching the engine and hydrodynamic transmission characteristics under the parallel power takeoff (pр. 17-18)
Kuznetsov N.G., Nekhoroshev D.A., Vorobiova N.S. A stationary loading characteristic of air-hydraulic planetary clutch (pр. 18-20)
Galiullin L.A., Zubkov Ye.V. A fuzzy neural network control model for diesel testing (pр. 21-23)
Svechnikov P.G. A form of two-sided wedge with minimum sticking (р. 24)
Astafyev V.L., Muslimov N.M., Malygin S.L. Performance of a sowing complexes loader (pр. 25-26)
Gorbachiov I.V., Shreyder Yu.M. The main stages of development of domestic harvesters with axial-rotor thrеshing and separating system (pр. 26-28)
Rodimtsev S.A., Potapov N.A. Optimization of fractional thrеshing and separating device’s blade parameters (pр. 28-31)
Chumakov V.G. Division of grain heap into fractions by a pneumatic screen separator (pр. 31-33)
Kotov A.V., Chuprynin Yu.V. Vector analysis of spatial lever mechanisms (pр. 33-38)
Khabrat N.I., Umerov E.D. Features of designing the reversing automatic tensioning wedge-belt drive (pр. 38-41)

Quality, reliability

Kochenov V.A., Nikitin Yu.I., Cheremokhina I.I., Chicherova T.S. Evaluating the design and manufacture of tribounits (pр. 41-44)
Komogortsev V.F., Kozhukhova N.Yu., Mikhalchenkov A.M., Kovalev A.P. Resistance of soil to the movement of a ploughshare taking into account the reinforcement of its surface (pр. 44-46)

Agricultural service

Tsariov Yu.A., Filobok S.V. Ways of increasing the reliability of grain combine harvesters in the network of dealer structures of Southern Federal District (pр. 46-48)

Foreign agricultural technologies and equipment

Slavkin V.I., Belov S.V., Romanenko V.N., Gorbachiov I.V. Review of up-to-date grain combine harvesters’ designs (pр. 49-53)

Economics, organization and technology of production

Maslov G.G. A new research tendency in the service of machine and tractor fleet with the use of power tool (pр. 54-56)

Exhibitions, fairs / conferences

Bobruisk tractors at the Hannover exhibition (р. 6)
«AGROMASH 60TK» tractor receives the gold at the «Golden Autumn» exhibition (р. 53)

Anniversary greetings

The 65th anniversary of O.I. Polivayev (р. 56)
The 105th anniversary of M.A. Pustygin (cover)

Lipkovich E.I. The bases of agricultural machinery industry development strategy (pр. 3-10)

Environmentally friendly technologies and equipment

Babayev Sh.M. Test results of local mechanization technology for chemical plant protection (pр. 10-13)

New machines and equipment

Shukhanov S.N., Khankhasayev G.F., Punsukov A.S. Design features of fan’s working wheel (pр. 14-15)
Alatyrev S.S., Andreyev R.V., Cheboksarova A.V. Improving the drive of cabbage harvester’s cutting device (pр. 15-17)

Theory, designing, testing

Scheltsyn N.A., Frumkin L.A., Ivanov I.V. The up-to-date stepless transmissions for farm tractors (pр. 18-26)
Fomin V.M., Grabovskiy A.A. Internal combustion engines on the basis of crank mechanism with dual kinematic links (pр. 26-29)
Zholobov L.A., Dydykin A.M., Suvorov E.A. The dependence of indicated power on the time–section of gas distribution mechanism of internal combustion engine (pр. 29-31)
Loparev A.A., Komkin A.S., Panchoshniy M.V. Comparative traction tests of MTZ-82 tractor using wheel and wheel-track propellers (pр. 31-32)
Gorshkov Yu.G., Chetyrkin Yu.B. Reducing the circulating power in the wheel drive of power tractors (pр. 33-36)
Konstantinov M.M., Khmura A.N., Poteshkin K.S., Nuralin B.N. Tractive resistance of a flat hoe with additional working members (pр. 36-38)
Akimov A.P., Konstantinov Yu.V., Akvilyanova I.N. The influence of soil properties and knife disc operating depth on the disc resistance (pр. 38-41)

Quality, reliability

Gabitov I.I., Valiyev A.R., Vakhitov R.A. The analysis of failures of electrohydraulic Common Rail injectors (pр. 41-43)
Borisov V.I., Kuznetsov V.V., Vodyakov V.N. Verification of mathematical model of active type sealing joints loading (pр. 43-46)
Zasypkin A.D., Dementyev V.B., Sterkhov M.Yu., Churkin A.V. Roughness of interior surface of hollow fingers and their durability during the non-central direct arch (pр. 46-48)
Gorokhova M.N. The influence of tension displacement phase angle on the quality of coatings under combined method (pр. 48-52)

Agricultural service

Ignatyev L.M., Abdrazakov E.F. Organization of agricultural technical services at the regional level (pр. 53-55)
CNH Capital enters the market of financial services in Russian Federation (р. 17)
An International conference in All-Russian Research Institute of repair and maintenance of machine and tractor fleet (ГОСНИТИ) (р. 52)

Anniversary greetings

The 75th anniversary of V.P. Yelizarov (р. 56)
The 75th anniversary of N.P. Sychugov (р. 56)

Yelizarov V.P., Antyshev N.M., Beylis V.M. Methodical recommendations on the evaluation of needs for crop production technologies in agriculture (рр. 3-5)
Valge A.M., Artemyev Yu.G. Problems of farms’ machine and tractor fleet structure optimization under market economy (рр. 6-7)

Environmentally friendly technologies and equipment

Likhanov V.A., Chuvashev A.N., Polevschikov A.S., Dolgikh M.A., Verstakov S.A. Effective and environmental performance of diesel with dual fuel supply system (рр. 8-10)

New machines and equipment

Dzotsenidze T.D., Ponomarev A.K., Ulyanov O.V., Kozlovskaya M.A., Ilyin V.M. Developing a new frame-panel superstructure for caterpillar tractors (рр. 11-13)
Gorshkov Yu.G., Chetyrkin Yu.B., Toshov N.B. A device for lifting the wheels of transport vehicle stuck in a deep rut (рр. 13-15)
Davidson Ye.I., Dmitriyev D.G. Effective soil separator for potato harvesters (рр. 15-16)

Theory, designing, testing

Eviyev V.A., Ochirov N.G., Ageyev S.S., Karuyev B.T. Optimization of operating parameters and modes of tractor according to its traction characteristics (рр. 17-18)
Grebnev V.P., Vorokhobin A.V. The effectiveness of regulation of wheeled tractors’ ballasting degree when operating with mounted machines (рр. 19-21)
Fomin V.M., Grabovskiy A.A. An internal combustion engine with discrete change of power for wheeled and caterpillar tractors (рр. 21-24)
Zholobov L.A., Dydykin A.M., Suvorov Ye.A. Dependence of the time–section of gas distribution mechanism on the valve lift height (рр. 24-26)
Zhulay V.A., Yenin V.I. An analytical description of diesel engine regulatory characteristic (рр. 26-28)
Zadneprovskiy R.P. Power consumption when driving rollers and wheel propellers (рр. 29-32)
Labukh V.M., Gorbachiov I.V. Comparative assessment of subsoilers (рр. 32-34)
Chetvertakov A.V. Constructive and kinematic parameters of fruit grading machine (рр. 34-36)
Lebedev A.T., Zakharin A.V. The duration of сontinuous operation of vacuum plate-type pump and its performance (рр. 36-38)

Quality, reliability

Yegozhev A.M. A method of adjusted strength calculation of parts with contacting thread connections (рр. 39-41)
Kochenov V.A. Influence of rubbing surfaces’ geometry on the durability and wear resistance of tribounits (рр. 41-42)
Grigoryev A.V., Komarov V.A. Ensuring the life characteristics of repairing and processing equipment (рр. 43-45)
Nikolayev Ye.V., Nistratova N.S. Factors influencing the parameter of crankcase gases flow as the main indicator of the cylinder-piston group technical state (рр. 45-46)

Economics, organization and technology of production

Lipkovich I.E., Petrenko N.V. Influence of operator’s motivation on the performance of man-machine systems (рр. 46-50)
Zabrodin V.P., Ponomarenko I.G., Tatarkin R.V. Technological schemes of machines for surface application of several types of mineral fertilizers (рр. 50-52)
Gavrilov S.A., Zinin M.A., Yerokhin V.V., Biryukov A.I., Yushin D.I., Kuznetsov V.A., Schedrin A.V. Regularities of contact interaction of the die with spherical deforming elements (рр. 52-54)

Commemorating the centenary of B.P. Kashuba’s birth

Abdula S.L. Memories of the chief designer (рр. 54-56)

Yelizarov V.P., Antyshev N.M., Beylis V.M. Aspects of development of regulatory requirements for crop production machinery in agriculture (рр. 3-5)
Zavrazhnov A.A., Zavrazhnov A.I., Lobachevskiy Ya.P. Reengineering in garden machinery production (рр. 5-10)
An important step in the development of innovation economics in Russia (р. 10)

Environmentally friendly technologies and equipment

Kartashevich A.N., Tovstyka V.S., Plotnikov S.A. Assessment of smoke opacity and toxicity of tractor diesel engine while working on rapeseed oil (рр. 11-13)
Likhanov V.A., Chuprakov A.I., Zonov A.V., Sharomov I.M. Effect of ethanol-fuel emulsion on the indicator, environmental performance and the characteristics of diesel engine heat release (рр. 13-16)

New machines and equipment

Zholobov L.A., Zakharov S.V., Nikiforov D.N. Improving the intake system of internal combustion engine (рр. 16-18)
Uspenskiy I.A., Kovalev I.V., Pimenov A.B., Yukhin I.A. A trailing vehicle for the transport of agricultural loads (рр. 18-19)

Theory, designing, testing

Kotovskov A.V., Potapov P.V., Simonov D.V. A method of comparative analysis of the locking principles of interaxle power distribution units (рр. 20-23)
Sharipov V.M., Kryuchkov V.A. Features of designing the inertial synchronizer for preselector gear box (рр. 24-26)
Briskin Ye.S., Chernyshev V.V., Zhoga V.V., Maloletov A.V. An experience of developing and testing the walking supports for sprinkling machines (рр. 27-31)
Loschakov P.A. Solving the equation of energy when modeling the convective heat exchange for high-speed transport diesels (рр. 32-33)
Kukharev O.N., Siomov I.N., Chirkov A.M. The efficiency of drum pelleting device with rotating bottom (рр. 34-35)
Okunev G.A., Chumakov V.G., Zhanakhov A.S. A technological line for post-harvest grain processing with division into streams (рр. 35-38)
Martynov V.M. Soil compaction caused by beet harvesters (рр. 38-42)
Podkolzin Yu.V. Formation of compact in the channel of press matrix (рр. 43-44)

Quality, reliability

Gorshkov Yu.G., Bogdanov A.V., Chetyrkin Yu.B., Popova A.G., Toshov N.B. Improving the traction and adhesive properties and the road safety of wheeled machines by slowdown of the skidding wheel axle shaft (рр. 45-47)
Kochenov V.A. Designing the geometrical parameters of interacting surfaces of internal combustion engine parts (рр. 48-49)
Zhidkov G.I. Forced oscillations of the “engine – torque converter” system of class 3 caterpillar tractor (рр. 50-51)
Zasypkin A.D., Dementyev V.B. Reducing the thickness variation in tubular billets under calibrating by spiral compression (рр. 51-53)

Economics, organization and technology of production

Kurbanov R.K. An algorithm for estimating the efficiency of harvesting and transport complex (рр. 54-55)

Critique and bibliography

Kolchin N.N. Environmental aspects of agricultural mechanization (рр. 44; 53)

Anniversary greetings

The 60th anniversary of Z.A. Godzhayev (р. 56)

Exhibitions, fairs / conferences

The IV International conference «Grain-growing Siberia» (р. 56)

Lipkovich E.I., Taranov M.A., Bondarenko A.M. Engineering and technical services – the basis of stable functioning of technical equipment of agroindustrial complex (pр. 3-12)

New machines and equipment

Zholobov L.A., Zakharov S.V., Nikiforov D.N. A new design of air filter for internal combustion engines (pр. 12-14)
Kireyev I.M., Koval Z.M. A seed disk for pelleted seeds (pp. 15-16)

Theory, designing, testing

Mamiti G.I., Lyanov M.S., Pliyev S.Kh., Salbiyeva Z.S. Stability of wheel tractor on the turn (pр. 18-21)
Sanzhapov R.R., Balakina Ye.V. Analysis of influence of wheel machine base on the motion stability (pр. 21-24)
Lysov A.M. Ensuring a smooth gear shift without interruption of power flux (pр. 24-31)
Yegorov V.N. Tractor adhesion weight in the pressure function in hydraulic system (pр. 31-32)
Gerasun V.M., Nesmiyanov I.A., Turygin P.V. Linkages in the telescope booms of loading manipulators (pр. 32-35)
Gadzhiyev P.I., Nazarov A.A. Mathematical analysis of breaking soil clods by beater drum (pр. 35-36)

Quality, reliability

Sapozhnikov I.I. Upgrading the methods of quality certification support (pр. 37-38)
Komogortsev V.F., Kozhukhova N.Yu., Mikhalchenkov A.M., Kovalev A.P. Analysis of force factors while ploughing soil with reinforced ploughshare (pр. 39-41)
Galiullin L.A. Developping a knowledge base for the automated system of diesel engines testing (pр. 41-44)
Zhidkov G.I. Conditions for the formation of oscillations in the “engine – torque converter” system of class 3 caterpillar tractor (pр. 17-18)

Foreign agricultural technologies and equipment

Goltyapin V.Ya. New models of foreign grain harvesters (pр. 44-53)

Economics, organization and technology of production

Abayev V.V., Trubilin Ye.I., Maslov G.G. An optimal system of resource-saving technologies of cereal crops complex harvesting in the Kuban region (pp. 54-56)

Chronicle

Nikolay Vasilievich Krasnoschiokov (р. 56)